Skip to main content
AG Network Cabling

Estimating & CSI · 6 min read

CSI Division 26, 27 & 28: Aligning California C-10 & C-7 Scopes

How California C-10 Electrical and C-7 Low Voltage licenses map cleanly across CSI MasterFormat Division 26, Division 27, and Division 28 bid packages.

CA CSLB #1076251 (C-7 & C-10)One Accountable Team for Power & Low VoltageFree On-Site Survey & Written QuoteVerify Credentials →

Key Takeaway

Commercial and public-works bid packages split infrastructure across CSI Division 26 (Electrical), Division 27 (Communications), and Division 28 (Electronic Safety & Security). Hiring a single California contractor holding both CSLB C-10 and C-7 classifications prevents scope gaps around dedicated IT circuits, grounding busbars, pathways, and fire-alarm door release.

Where Multi-Subcontractor Bid Packages Break Down

On a typical tenant improvement, school modernization, or data center white-space build, Division 26 carries panelboards, branch circuits, grounding, and conduit stubs, while Division 27 carries structured cabling, fiber, and AV, and Division 28 carries cameras, access control, and fire alarm.

When three separate subcontractors bid those divisions independently, common friction points fall into the cracks: who supplies the dedicated 20A locking receptacle in the IDF, who bonds the telecom rack to the TMGB busbar, who wires recessed power behind boardroom displays, and who ties the maglock fail-safe relay into the fire alarm panel.

Division-by-Division Scope Mapping Under CA CSLB #1076251

Holding active California C-10 (Electrical) and C-7 (Low Voltage Systems) licenses allows AG Network Cabling to bid and self-perform coordinated packages across all three divisions:

  • Division 26 (Electrical — C-10): Dedicated server/IDF circuits, rack PDUs, sub-panels, recessed display outlets, telecom grounding/bonding (NEC Art. 250 / TIA-607-E), and TI branch circuits.
  • Division 27 (Communications — C-7): Cat6/Cat6A structured cabling, OS2/OM4/OM5 fiber backbones, MPO/MTP data center trunks, MDF/IDF racks, AV/conference rooms, sound masking, paging, and VoIP.
  • Division 28 (Electronic Safety & Security — C-7 / C-10): Security cabling, IP video surveillance (NDAA §889 compliant), access control doors, electrified hardware interfaces, and fire-alarm life-safety coordination.

Estimator Bid-Checklist for Combined Packages

When inviting AG to bid a combined Division 26/27/28 scope, highlight any shared pathways (cable tray, innerduct, floor boxes), specify whether UL-listed firestopping is included per trade, and attach the applicable prevailing-wage determination or NDAA §889 hardware clauses.

Referenced Standards & Codes

Standard / CodeWhat It Governs
2025 California Electrical CodeDivision 26 electrical circuits, grounding, and Division 27/28 low-voltage wiring rules
ANSI/TIA-569-E & TIA-607-EShared telecom pathways, MDF/IDF rooms, and grounding/bonding

Related AG Services

Frequently Asked Questions

Can a C-7 Low Voltage contractor install a dedicated 120V electrical outlet in a telecom closet?

No. Line-voltage 120V/208V circuits require a California C-10 Electrical license. Because AG holds both C-7 and C-10 under CSLB #1076251, one crew can legally perform both scopes.

CA CSLB #1076251 · C-7 Low Voltage & C-10 Electrical

Ready to scope your project or send plans?

Upload drawings, specifications, or an Invitation to Bid, or call us to schedule a free on-site survey.