Skip to main content
AG Network Cabling
Security & Life Safety

Video Surveillance & CCTV

Cleanly mounted IP cameras, properly sized VMS/NVR storage, and NDAA-compliant sourcing engineered for clear evidence.

CA CSLB #1076251 (C-7 & C-10)One Accountable Team for Power & Low VoltageFree On-Site Survey & Written QuoteVerify Credentials →

At a Glance

AG Network Cabling designs, installs, and maintains commercial IP video surveillance (CCTV) systems across Southern California, statewide California, and multi-site rollouts. Licensed under CA CSLB #1076251 (C-7 and C-10), we deploy dome, bullet/IR, PTZ, and megapixel cameras, NVR/VMS servers, and hardened camera VLANs with NDAA FY2019 §889 compliant hardware sourcing for commercial and public-sector buyers.

SECURITY & LIFE SAFETY · SYSTEM ARCHITECTURECA CSLB #1076251 · C-7 & C-10
SECURITY HEADENDVMS / NVR · ACCESS CTRLHARDENED CAMERA VLANNDAA §889 · UL 294IP DOME / PTZ / LPRONVIF · SHIELDED PoEFIRE ALARM RELEASENFPA 101 FAIL-SAFECARD / MOBILE / PIVFICAM / CBC 11B HEIGHTSTRIKE / MAGLOCK / REXCOMPOSITE DOOR CABLE
Typical AG Network Cabling topology for Video Surveillance & CCTV (NDAA FY2019 §889 (P.L. 115-232))

Why Buyers Choose Disciplined Execution

Cameras aimed into glare, undersized hard drives that overwrite footage in 5 days, and exposed outdoor cables undermine an entire security investment. For public agencies and federal contractors, inadvertently installing NDAA Section 889 prohibited hardware can trigger immediate contract disqualification.

We pair neat, weather-sealed installations with verified pixel-density coverage, NDAA-compliant equipment sourcing, and hardened network handoffs.

Scope We Deliver

IP Cameras & Field Mounting

01
  • Indoor/outdoor dome, turret, bullet/IR, multi-sensor, PTZ, megapixel, and discreet covert cameras
  • Architectural mounting with concealed conduit, weatherproof junction boxes, and clean sightlines
  • License plate recognition (LPR) and perimeter wide-dynamic-range (WDR) placement where specified

VMS, NVR & Retention Sizing

02
  • On-premises NVR/server racks, cloud-managed VMS, and hybrid multi-site video management
  • Storage and retention sizing calculated for frame rate, resolution, codec, and required retention days
  • Integration with access control systems for unified event review

Compliance & Network Hardening

03
  • NDAA FY2019 Section 889 and TAA compliant camera and recorder sourcing
  • Cybersecurity hardening: replacing default credentials, segmented camera VLANs, and current firmware
  • Ongoing preventative maintenance, lens cleaning, and camera replacement service

How It Works: Survey to Turnover

  1. 1. On-Site Survey & Analysis

    PHASE 01

    We walk the facility, review room acoustics, lighting, mounting structure, or existing infrastructure, and issue a written scope and quote.

    Site survey checklistWritten scope, timeline & quote
  2. 2. Pre-Construction & Submittals

    PHASE 02

    We prepare cut sheets, equipment schedules, and pathway coordination with the general contractor and IT/facilities team.

    Submittals & cut sheetsRFI responsesRack/room elevations
  3. 3. Procurement & Staging

    PHASE 03

    Hardware and cabling are sourced per spec (including NDAA §889 compliance where required) and staged cleanly for site delivery.

    BOM verificationPre-configuration / staging log
  4. 4. Installation & Dressing

    PHASE 04

    Concealed wiring, clean mounts, and Velcro-dressed equipment racks keep both public rooms and back-of-house closets organized.

    Daily progress logsIn-progress quality inspection
  5. 5. Testing & Commissioning

    PHASE 05

    Every endpoint, audio zone, camera stream, or phone extension is commissioned and verified under real operating conditions.

    Commissioning test reportPunchlist verification
  6. 6. Documentation & Closeout

    PHASE 06

    We deliver TIA-606-D labels, as-built drawings, O&M manuals, and hands-on administrator or end-user training.

    As-builts & port mapsO&M manualsOwner training sign-off
  7. 7. Ongoing Support

    PHASE 07

    Post-installation troubleshooting, moves/adds/changes, and scheduled maintenance keep systems reliable long after turnover.

    Service ticketsUpdated documentation

Applicable Standards & Codes

Standard / CodeWhat It Governs
NDAA FY2019 §889 (P.L. 115-232)Prohibition on covered telecom and video surveillance equipment in federal and federally funded projects
ONVIF Profiles S, G, T & MOpen IP camera and VMS interoperability
IEC 62676Video surveillance system (VSS) image-quality and operational guidelines
ANSI/TIA-568.2-E & 2025 CECPoE camera cabling, outdoor surge protection, and dedicated NVR rack power

Deliverables at Turnover

  • As-built camera map showing exact mounting locations, fields of view, and IP/VLAN schedule
  • Verified day/night snapshot captures and retention calculation sheet
  • Credential handoff documentation and administrator VMS training

Testing & Verification

Every camera is focused, aimed, and verified in both daylight and low-light/IR conditions, with continuous/motion recording and retention confirmed on the VMS.

Warranty & Licensing

Workmanship warranty terms and camera/VMS manufacturer warranties are provided in writing with your quote.

Applicable License: California CSLB #1076251 (C-7 & C-10)

How This Scope Adapts by Industry

Cage, aisle, loading dock, and perimeter monitoring with audit-ready retention.

Why AG Network Cabling

Single accountable contractor for C-7 low voltage and C-10 electrical.
Clean, Velcro-dressed, ANSI/TIA-606-D labeled infrastructure.
Discreet execution in occupied offices, luxury hotels, clinics, and data halls.
Direct access to accountable owners and a free on-site survey before work begins.

Related Services

Frequently Asked Questions

Are your video surveillance installations NDAA Section 889 compliant?

Yes. We source NDAA FY2019 Section 889 compliant cameras and recorders—excluding prohibited manufacturers—for all government, public-sector, and enterprise projects requesting compliant hardware.

How do you secure IP cameras on our corporate or municipal network?

We remove all factory default passwords, apply current firmware before turnover, coordinate dedicated camera VLANs with your IT team, and disable unnecessary legacy protocols.

Can you integrate video surveillance with our access control doors?

Yes. Linking your VMS with access control allows operators to view synchronized camera footage whenever a door is forced, held open, or badged.

How do you size NVR storage for 30, 60, or 90 days of retention?

During the site survey we calculate bitrate based on camera count, resolution, frame rate, motion percentage, and compression codec so your storage array meets your exact retention policy.

Do you service and upgrade existing legacy analog or coax camera systems?

Yes. We can migrate legacy coax systems to IP Cat6A/PoE infrastructure cleanly while removing abandoned wiring per NEC rules.

CA CSLB #1076251 · C-7 Low Voltage & C-10 Electrical

Ready to scope your project or send plans?

Upload drawings, specifications, or an Invitation to Bid, or call us to schedule a free on-site survey.