Skip to main content
AG Network Cabling
Network & Data Center

Network Testing & Certification

Defensible, instrument-verified copper and fiber test reports that prove every link meets TIA standards before turnover.

CA CSLB #1076251 (C-7 & C-10)One Accountable Team for Power & Low VoltageFree On-Site Survey & Written QuoteVerify Credentials →

At a Glance

AG Network Cabling performs copper and optical fiber testing, certification, and fault-finding for new installations and existing commercial or data center cable plants. Using calibrated field test instruments aligned with ANSI/TIA-1152-A and TIA-526 standards, we deliver permanent link and channel certification reports, Tier 1 OLTS and Tier 2 OTDR traces, and clear troubleshooting documentation.

NETWORK & DATA CENTER · SYSTEM ARCHITECTURECA CSLB #1076251 · C-7 & C-10
ANSI/TIA-1152-A CERTIFICATION SWEEP (1–500 MHz · CAT6A PERMANENT LINK)100% PASSMEASURED HEADROOMTIA-568.2-E LIMITWIREMAP · LENGTH · INSERTION LOSS · NEXT · PSNEXT · ACR-F · DCRU · RETURN LOSS
Typical AG Network Cabling topology for Network Testing & Certification (ANSI/TIA-1152-A)

Why Buyers Choose Disciplined Execution

A basic wiremap continuity check does not guarantee a Cat6A drop will carry 10 Gbps or 90 W PoE++ without packet loss. Uncertified cabling leads to intermittent VoIP drops, slow Wi-Fi access points, and rejected manufacturer warranties.

Whether certifying a new buildout or auditing a troubled legacy cable plant, IT directors and commissioning agents need calibrated, native electronic test results.

Scope We Deliver

Copper Certification (Balanced Twisted-Pair)

01
  • Permanent Link and Channel certification for Cat5e, Cat6, Cat6A, and Cat8
  • Full parameter testing: wiremap, length, propagation delay, insertion loss, NEXT, PSNEXT, ACR-F, return loss, and DCRU
  • Distinguishing Certification (TIA compliance) vs. Qualification (bandwidth) vs. Verification (wiremap)

Optical Fiber Testing (Tier 1 & Tier 2)

02
  • Tier 1 OLTS bidirectional optical attenuation, length, and polarity testing (Encircled Flux compliant)
  • Tier 2 OTDR trace characterization pinpointing splice, connector, and macro-bend loss events
  • Connector end-face microscopy inspection and precision cleaning

Troubleshooting & Warranty Packages

03
  • Auditing existing commercial closets and diagnosing intermittent link failures
  • Compiling native test databases formatted for manufacturer extended-warranty submission
  • Summary pass/fail reports paired with TIA-606-D port schedules

How It Works: Survey to Turnover

  1. 1. On-Site Survey & Analysis

    PHASE 01

    We walk the facility, inspect existing pathways, closets, and electrical capacity, and clarify schedule or occupancy constraints before pricing.

    Site survey notesPathway & closet assessmentWritten scope and quote
  2. 2. Pre-Construction & Submittals

    PHASE 02

    We prepare product cut sheets, coordinate RFIs with the general contractor or IT lead, and align pathway routing with other trades.

    Product submittals & cut sheetsRFI responsesShop drawings / port schedules
  3. 3. Procurement & Staging

    PHASE 03

    Materials are ordered to specification, staged cleanly, and verified against jobsite delivery windows and security protocols.

    Bill of materials verificationDelivery & staging schedule
  4. 4. Installation & Dressing

    PHASE 04

    Field installation follows NEC, California Electrical Code, and TIA pathway rules with Velcro-dressed bundles and clear trade separation.

    Daily progress logsIn-progress quality checks
  5. 5. Testing & Commissioning

    PHASE 05

    Every drop, fiber strand, circuit, or device is verified against applicable TIA, IEEE, or NFPA performance limits before turnover.

    Certification test reportsCommissioning & punchlist sign-off
  6. 6. Documentation & Closeout

    PHASE 06

    We label infrastructure to ANSI/TIA-606-D conventions and hand over complete digital closeout packages for your facilities and IT teams.

    TIA-606 labeling scheduleRedline as-builtsO&M manuals & owner training
  7. 7. Ongoing Support

    PHASE 07

    Post-turnover moves, adds, changes (MACs), troubleshooting, and preventive maintenance keep systems documented as your facility evolves.

    Updated port mapsService tickets & maintenance records

Applicable Standards & Codes

Standard / CodeWhat It Governs
ANSI/TIA-1152-AField test instrument accuracy requirements (Level IIIe / Level 2G)
ANSI/TIA-568.2-EPermanent link and channel performance limits for Cat5e/6/6A/8
ANSI/TIA-568.3-EOptical fiber link loss budgets and polarity
TIA-526-14 & TIA-526-7Multimode (Encircled Flux) and single-mode optical power loss test methods

Deliverables at Turnover

  • 100% pass/fail summary PDF and native instrument test files for every tested link
  • OTDR event tables and trace files (when Tier 2 fiber testing is specified)
  • Fault log and remediation recommendations for legacy-plant audits

Testing & Verification

Field testers are maintained on current calibration schedules and configured to the exact cable category, NVP, and TIA limit required by project specifications.

Warranty & Licensing

Test documentation supports workmanship sign-off and eligible manufacturer system warranty registration.

Applicable License: California CSLB #1076251 (C-7)

How This Scope Adapts by Industry

High-throughput testing of hundreds or thousands of MPO/LC trunks and copper drops ahead of rack-and-stack.

Why AG Network Cabling

Single accountable contractor for C-7 low voltage and C-10 electrical.
Clean, Velcro-dressed, ANSI/TIA-606-D labeled infrastructure.
Discreet execution in occupied offices, luxury hotels, clinics, and data halls.
Direct access to accountable owners and a free on-site survey before work begins.

Related Services

Frequently Asked Questions

What is the difference between certification, qualification, and verification?

Verification only checks wiremap and length. Qualification checks whether a link supports a specific Ethernet speed. Certification—performed to ANSI/TIA-1152-A—tests every electrical parameter against TIA/ISO standards and is required for commercial turnovers and manufacturer warranties.

Do you test Permanent Link or Channel configurations?

We default to Permanent Link testing for installed horizontal cabling (panel to faceplate) because it isolates the fixed plant from user patch cords, and we perform Channel testing when specifically requested.

Can you test and certify cabling installed by another contractor?

Yes. We provide independent third-party testing, fault diagnosis, and re-termination services for existing buildings or inherited tenant spaces.

What format are test reports delivered in?

We deliver organized PDF summary and detailed reports alongside the native tester project files, indexed to your ANSI/TIA-606-D cable IDs.

Why does Encircled Flux matter for multimode fiber testing?

Encircled Flux (required under TIA-526-14 / IEC 61280-4-1) standardizes how light is launched into multimode fiber so test results are accurate and repeatable across different instruments.

CA CSLB #1076251 · C-7 Low Voltage & C-10 Electrical

Ready to scope your project or send plans?

Upload drawings, specifications, or an Invitation to Bid, or call us to schedule a free on-site survey.