Skip to main content
AG Network Cabling
Communications & AV

VoIP & Business Phone Systems

Clear business voice systems backed by properly engineered PoE cabling, QoS readiness, and E911 compliance.

CA CSLB #1076251 (C-7 & C-10)One Accountable Team for Power & Low VoltageFree On-Site Survey & Written QuoteVerify Credentials →

At a Glance

AG Network Cabling deploys commercial VoIP and business phone systems—including desk handsets, softphones, SIP trunking, PSTN integration, number porting, and paging tie-ins—for offices, hotels, clinics, and campuses across California. Licensed under CA CSLB #1076251 (C-7), we pair physical PoE/VLAN network readiness with Kari's Law and RAY BAUM'S Act E911 configuration awareness.

COMMUNICATIONS & AV · SYSTEM ARCHITECTURECA CSLB #1076251 · C-7 & C-10
ROOM & ACOUSTIC LAYOUTDISCAS / DSPANSI/AVIXA F502.01 AV RACKConcealed Mounts · Automated Lifts · C-10 PowerASTM E1130 SOUND MASKINGZoned Emitters · Speech Privacy · Overhead PagingVoIP & E911 COMPLIANCEKari's Law Direct 911 · RAY BAUM'S Dispatchable Loc.
Typical AG Network Cabling topology for VoIP & Business Phone Systems (Kari's Law (FCC 47 CFR Part 9))

Why Buyers Choose Disciplined Execution

Choppy call audio, dropped transfers, and missed E911 location rules usually trace back to weak underlying cabling, overloaded PoE switches, or rushed number porting. Voice reliability starts at the physical network layer and continues through clean handset programming and cutover testing.

Scope We Deliver

VoIP Systems & Call Flow

01
  • Hosted cloud VoIP and on-premises IP-PBX deployment and handset provisioning
  • SIP trunking, legacy PSTN/analog fax/elevator line integration, and number porting coordination
  • Auto-attendants, hunt groups, voicemail-to-email, and desktop/mobile softphone setup

Network Readiness & E911 Compliance

02
  • PoE switch readiness, dedicated voice VLAN coordination, and QoS verification
  • Kari's Law direct 911 dialing (no prefix) and on-site security/front-desk notification configuration
  • RAY BAUM'S Act §506 dispatchable location setup (street address, building, floor, suite/room)
  • Integration with overhead paging systems and door-entry intercoms

How It Works: Survey to Turnover

  1. 1. On-Site Survey & Analysis

    PHASE 01

    We walk the facility, review room acoustics, lighting, mounting structure, or existing infrastructure, and issue a written scope and quote.

    Site survey checklistWritten scope, timeline & quote
  2. 2. Pre-Construction & Submittals

    PHASE 02

    We prepare cut sheets, equipment schedules, and pathway coordination with the general contractor and IT/facilities team.

    Submittals & cut sheetsRFI responsesRack/room elevations
  3. 3. Procurement & Staging

    PHASE 03

    Hardware and cabling are sourced per spec (including NDAA §889 compliance where required) and staged cleanly for site delivery.

    BOM verificationPre-configuration / staging log
  4. 4. Installation & Dressing

    PHASE 04

    Concealed wiring, clean mounts, and Velcro-dressed equipment racks keep both public rooms and back-of-house closets organized.

    Daily progress logsIn-progress quality inspection
  5. 5. Testing & Commissioning

    PHASE 05

    Every endpoint, audio zone, camera stream, or phone extension is commissioned and verified under real operating conditions.

    Commissioning test reportPunchlist verification
  6. 6. Documentation & Closeout

    PHASE 06

    We deliver TIA-606-D labels, as-built drawings, O&M manuals, and hands-on administrator or end-user training.

    As-builts & port mapsO&M manualsOwner training sign-off
  7. 7. Ongoing Support

    PHASE 07

    Post-installation troubleshooting, moves/adds/changes, and scheduled maintenance keep systems reliable long after turnover.

    Service ticketsUpdated documentation

Applicable Standards & Codes

Standard / CodeWhat It Governs
Kari's Law (FCC 47 CFR Part 9)Direct 911 dialing without an outside-line prefix plus on-site notification on MLTS systems
RAY BAUM'S Act §506Automatic transmission of dispatchable location (floor, suite, room) with every 911 call
ANSI/TIA-568.2-ECat6/Cat6A PoE cabling supporting IP desk phones and voice gateways

Deliverables at Turnover

  • Extension directory, call-flow diagram, and E911 dispatchable location schedule
  • Cutover test log verifying inbound/outbound calling, porting, and 911 test call verification
  • Staff quick-reference guide and administrator training

Testing & Verification

Every handset, SIP trunk, auto-attendant path, paging code, and E911 dispatchable location entry is verified during cutover.

Warranty & Licensing

Workmanship warranty terms and hardware manufacturer warranties are documented in your written quote.

Applicable License: California CSLB #1076251 (C-7)

How This Scope Adapts by Industry

Clean desk-phone and softphone rollouts with zero downtime during number porting.

Why AG Network Cabling

Single accountable contractor for C-7 low voltage and C-10 electrical.
Clean, Velcro-dressed, ANSI/TIA-606-D labeled infrastructure.
Discreet execution in occupied offices, luxury hotels, clinics, and data halls.
Direct access to accountable owners and a free on-site survey before work begins.

Related Services

Frequently Asked Questions

What are Kari's Law and RAY BAUM'S Act requirements for office phone systems?

Kari's Law requires multi-line phone systems to dial 911 directly without a prefix (like '9') and trigger an on-site alert. RAY BAUM'S Act requires transmitting a dispatchable location—such as floor and suite or room number—to emergency responders.

Can we keep our existing business phone numbers when moving to VoIP?

Yes. We coordinate number porting with your carrier so existing main lines and direct-inward-dial (DID) numbers transfer cleanly with a scheduled cutover window.

Do we need new cabling to deploy IP phones?

Not always, but IP phones require reliable Cat5e/Cat6/Cat6A cabling and PoE power. During our free on-site survey we test existing drops and identify any runs that need replacement.

Can VoIP integrate with our overhead paging and door intercoms?

Yes. We connect SIP paging gateways and IP door stations so staff can answer entrance intercoms and make overhead pages from desk handsets.

Do you support both hosted cloud VoIP and on-premises PBX platforms?

Yes. We deploy hosted cloud VoIP platforms as well as on-premises IP-PBX hardware and SIP trunking depending on your IT policy and site count.

CA CSLB #1076251 · C-7 Low Voltage & C-10 Electrical

Ready to scope your project or send plans?

Upload drawings, specifications, or an Invitation to Bid, or call us to schedule a free on-site survey.